Monthly Full Milk Carafe Cleaning With Milk Circuit Cleaner; Warranty And Support - Saeco Intelia Deluxe HD8771/93 Manual

Monthly full milk carafe cleaning with milk circuit cleaner

FULL
CARAFE
CLEAN
MAX
CLEANING...

Warranty and support

19 Pull the fitting outwards and separate it from the remaining part.
20 Clean all parts with lukewarm water.
21 Reassemble all parts following in reverse order.
To keep the entire milk circuit clean of milk residues, use the Saeco milk
circuit cleaner.
Note: Before you start the procedure, make sure that the water tank is filled
up to the MAX level.
1 Press the MENU button.
2 Scroll through the menu till you see FULL CARAFE CLEAN.
3 Press the OK button.
4 Pour the content of the milk circuit cleaner sachet into the milk carafe
and fill the milk carafe with water up to the maximum level.
5 Turn the milk dispensing spout to the 'I' position and insert the milk
carafe into the machine.
6 Place a large container under the milk dispensing spout.
7 Press the OK button to confirm.
-
The display shows the following icon.
Note: You cannot interrupt the full milk carafe cleaning. If the full milk
carafe cleaning gets interrupted, you have to restart the cycle again.
8 The display reminds you have to fill the milk carafe with fresh water, fill
the milk carafe up till the max level. Press ok button to confirm.
-
The display shows the following icon.
9 The display shows a tick icon when the carafe rinsing cycle is finished.
press the ESC button to return to the main menu.
If you need information or support, please visit www.saeco.com/support or
read the separate worldwide guarantee leaflet.
To buy spare parts, visit www.shop.philips.com/service or go to your Saeco
dealer or authorized service center. You can also contact the Philips/Saeco
hotline in your country.
English
21