MSI Optix MAG270VC2 Manual page 22

1st Level Menu
Anti Motion Blur
Zero Latency
Refresh Rate
Alarm Clock
2-6
Screen
Assistance
Adaptive Sync
2nd/3rd Level Menu
(OFF)
(ON)
(OFF)
(ON)
Location Left Top
Right Top
Left Bottom
Right Bottom
Customize
OFF
ON
Location Left Top
Right Top
Left Bottom
Right Bottom
Customize
OFF
15:00 00:01~99:59
30:00
45:00
60:00
None
Icon
Position
Reset
(OFF)
(ON)
Description
■ When Anti Motion Blur is enabled, HDCR and
Brightness cannot be enabled and will be
grayed out�
■ Response time will be grayed out while Anti
Motion Blur is enabled�
■ Anti Motion Blur have to set to OFF while
Adaptive Sync is set to ON�
■ Users can adjust this item in any mode , any
input source , any resolution and any screen
refresh rate�
■ While Adaptive Sync is enabled, Zero
Latency have to set to ON�
■ Users can adjust Refresh Rate in any Mode�
■ Default Refresh Rate Location is Left Top�
Location is adjustable in OSD Menu� Press
the Middle Button to confirm and apply your
Refresh Rate Location�
■ This monitor follows and works at the
Operating System's preset Screen Refresh
Rate�
■ Users can adjust Alarm Clock in any Mode�
■ After setting the time, press the Middle
Button to activate the timer�
■ Default Alarm Clock Location is Left Top�
Users can select their own location�
■ Users can adjust Screen Assistance in any
Mode�
■ Screen Assistance default is None�
■ Adaptive Sync prevents screen tearing
■ DisplayPort or HDMI default is ON and can
be adjusted ON/OFF in any mode, any
resolution, any input source and any screen
refresh rate
■ Anti Motion Blur will be disabled, if Adaptive
Sync is enabled�