Inflation - Parkside 384213 2107 Instructions Manual

Compressed air hose with quick coupler
Connecting
♦ Push the compressed air connector
quick coupler of the compressed air hose
the sleeve automatically springs forwards.
Cutting
♦ Pull back the sleeve on the quick coupler of the
compressed air hose
compressed air connector
CAUTION!
► Caution! When disconnecting the quick
coupler of the compressed air hose
the coupler firmly to prevent injuries caused
by the hose flying off.
Inflation
with adapter
Schrader valve
Area of use
This application allows for a simple and accurate
inflation. The manometer
tire pressure. Thanks to the integrated release
valve it is possible to reduce the tire pressure
if it is too high.
♦ Ensure that the ON/OFF switch
♦ Press the lever quick coupler
attach it.
♦ Place the lever quick coupler
and then release the lever.
♦ Insert the mains plug
a mains power socket.
♦ Switch the ON/OFF switch
grated control lamp lights up.
♦ Pull the trigger .
PKZ 180 C5
into the
,
and remove the
.
, hold
is used to check the
is set to "O".
downwards to
onto the valve
of the compressor into
to "I". The inte-
♦ Read the air pressure from the manometer
♦ Let the trigger off again.
♦ Switch the ON/OFF switch
as the correct or permissible air pressure has
been reached. The integrated control lamp
goes out.
♦ Press down the lever quick coupler
it off the valve.
♦ Remove the mains plug
power socket.
using the valve adapter
Sclaverand valve
Dunlop valve
Area of use
The valve adapter facilitates easy inflation of
bicycle tires.
♦ Use the valve adapter
shown above.
♦ Connect the valve adapter
quick coupler and then release it.
♦ Start by pressing the valve adapter
valve.
♦ Inflate as described above.
.
to "O" as soon
and pull
from the mains
to pump to the valves
into the lever
onto the
GB │ MT │
49 ■