Olivetti d-COPIA3500MF plus Operation Manual page 390

Setup and Registration (System Menu) > System Menu
Item
Low Power Timer
Panel Reset Timer
Sleep Timer
Interrupt Clear Timer
Error Job Skip
Error Clear Timer
1
Unusable Time*
Sleep Level
Sleep Rules
Set amount of time before entering the Low Power mode.
Value: 1 to 240 minutes (1 minute increments)
Low Power Mode and Auto Low Power Mode (page 3-14)
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Device Log History] is set to [On].
Set amount of time before entering Sleep.
Value: For Europe 1 to 120 minutes (1 minute increments)
Except for Europe 1 to 240 minutes ( 1 minute increments)
NOTE
This function is displayed when [Auto Sleep] is set to [On].
Set the period after which the machine reverts to Normal mode when it has been set to
Interrupt Copy mode and then left unused.
Value: 5 to 495 seconds (in 5 second increments)
Set whether a job for which a "Add paper in cassette #" or "Add paper in Multi Purpose tray" error
occurred when the job was started is automatically skipped after a set period of time elapses.
Value: Off, On
NOTE
• When a job is skipped, it is moved to the end of the job queue.
• If [On] is selected, set the time until the job is skipped. The setting range is 5 to 90
(5 second increments).
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically
clearing errors.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Error Clear] is set to [On].
For details, refer to the FAX Operation Guide.
Select the sleep level.
Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.
Value: Quick Recovery, Energy Saver
NOTE
This function will not be displayed when the optional Network Interface Kit is installed.
Select whether to use the Energy Saver mode for the following functions individually:
• Network
• USB Cable
2
• Card Reader*
1
• FAX*
3
• NIC*
• Application
Value: Off, On
NOTE
When the machine has entered sleep mode with Energy Saver setting, it does not wake from
sleep mode when it receives print data from a PC connected by USB cable.
8-55
Description