Toro 74453TE Operator's Manual page 38

Figure 40
5. Separate the foam and paper elements
41).
Figure 41
Servicing the Foam Element
1. Wash the foam element in liquid soap and
warm water. When the element is clean, rinse
it thoroughly.
2. Dry the element by squeezing it in a clean cloth.
Important:
Replace the foam element if it
is torn or worn.
Servicing the Paper Element
1. Gently tap the paper element to dislodge dirt.
Note:
pressurized air, as this will damage the element.
Note:
element. Handle the new element carefully;
do not use if the sealing surfaces are bent or
damaged.
2. Clean the air-cleaner base as required, and
g027800
check the condition.
Installing the Air Cleaner
1. Install the foam element over the paper element.
Note:
elements.
2. Align the holes of the filter into the manifold
ports.
3. Rotate the filter down into the chamber and fully
seat it against the manifold
g027801
(Figure
g027802
4. Close the cover.
38
Do not wash the paper element or use
Replace a dirty, bent, or damaged
Ensure that you do not damage the
(Figure
Figure 42
42).
g228022