Sensit GOLD Quick Start Instructions

HINT: As you approach the source of the
leak continue adjusting the wheel without
moving the sensor head to a uniform tick
sound until you locate the exact location of
the leak.
IMPORTANT: When replacing
gooseneck into the clip on the right side,
wrap the gooseneck in a wide circular
manner counter-clockwise around the back
of the instrument. Bending in the opposite
direction may cause damage over the life of
the product.
WARNINGS:
To prevent ignition of flammable or combustible
atmospheres, disconnect power before servicing.
To reduce the risk of ignition of a flammable
atmosphere, batteries must only be changed in
an area known to be nonflammable.
Do not mix batteries of different age or type.
851 Transport Drive
Valparaiso, IN 46383-8432
the
Innovative Detection Solutions
SENSIT CO
®
SENSIT GOLD
®
SENSIT ® GOLD 100
SENSIT GOLD CGI
®
SENSIT GOLD G2
®
SENSIT HCN
®
SENSIT HXG-2
®
SENSIT ® HXG-2d (2dr)
SENSIT ® HXG-3 (3P)
SENSIT P100
®
SENSIT P400
®
Distributed by:
MADE IN USA
Phone: 219 465 2700
Web: www.gasleaksensors.com
SENSIT PMD
®
SENSIT RLD-2
®
SENSIT ® TKX
TRAK-IT IIIa
®
ULTRA-TRAC MJL
®
GAS-TRAC
®
EX 1000
SMART-CAL TM
SCAL-100
SCAL-N
TM
Quick-Start Instructions
This is not a substitute for the
instruction manual. It is for
reference only.
Read and understand the
instruction manual before use.