Operation Mode "Automatic - Olsberg Levana 43/147 Instructions Manual

Operation mode "automatic"

Display
automatic
temp.: 16 / 20 °C
heating
Fr,08:55 next
automatic
temp.: 16 / 20 °C
heating
Fr,08:55 next
Action Description
In "automatic" mode the appliance heats in the pre-
set time programs depending on the selected room
temperature.
Outside of the time programs the preset night set
temperature is used as the reference value.
If no time programs are stored, continuous opera-
tion is possible.
During heating the preset room temperature can be
changed at any time.
Select the temperature with (ENTER) (the value
flashes), set the value with ↓ or ↑ and confirm with
or
(ENTER).
The temperature change is only valid until the next
time program change, if room temperatures are
stored for the time programs.
By pressing the "Fire-key" the heating release is is-
sued or blocked.
The party function is switched on with the "Party-
key", i.e. the preset time programs will de ignored
and the appliance heats to the set room tempera-
ture.
When switching on during the operating status "heat-
ing", the next "switch-off time" will be ignored, the
appliance continues to heat. At the following switch-
on time, the party function switches off automatical-
ly and the appliance again works as programmed.
When switching on during "standby" operating sta-
tus, the "switch-off time" that is taking place will be
ignored and the appliance ignites in order to go into
heating mode. At the next switch-on time the party
function switches off automatically and the appliance
again works as programmed.
By repeatedly pressing the "Party-key" the party
function can be switched off manually.
With the "cocktail glass" symbol the party function is
shown in the upper right of the display.
49