Advertisement
TM-5500/5000 Quick Setup Installation Guide
How to Rename/Edit a Satellite
Press the Menu button on the remote. Use the left/right arrows on the
remote until you see Installation. Go to Satellite Setup. Press OK. P
Red button on the remote. A pop-up will appear. Edit and re-name yo
satellite. Press Exit to save.
H
ow to Delete All Channels in the Memory (Factory Reset)
P
ress the Menu button on the remote. Use the left/right arrows on the
remote until you see Main Menu. Go to Reset (factory default). Press
A pop-up will appear saying, "Do you want to reset?" Select Yes. This will
delete the entire memory of the receiver. If asked for the Master Passwor
telephone your dealer to get t
H
ow to Find Out the Software Version in the Receiver
P
ress the Menu button on the remote. Use the left/right arrows on the
remote until you see Edit Channel. Go to STB information. Press OK.
the top of the page the software version of the receiver is displayed. Check
the data version (which starts with HER). You will see an American date,
for example 10.29.03 (the English date should be 29.10.03). To obtain the
latest information about your software, go to
to
the Downloads page
H
ow to Edit and Save PIDS
Press the Menu button on the remote. Use the left/right arrows on the
remote until you see Edit Channel and press OK. Select your channel and
press OK. A pop-up menu will appear. Go to Edit PID and press OK. Ente
a new PID and press Exit to save. For some unnamed or user channels this
may not be possible, therefore they have to be renamed to the original name
After doing this, you will be able to edit the new PID and save.
If Satellites or Channels are n
Go to Satellite Setup and press OK. Use the right/left arrows to find th
satellite that has a problem and press OK. Go to the bottom of the screen
and press OK on Delete Satellite to delete the satellite. Select Save and
he master password.
.
ot Found or Saved Correctly
www.
technomate.com
ress the
ur
OK.
d,
At
and go
r
.
e
8
Advertisement
