Advertisement
TM-5500/5000 Quick Setup Installation Guide
Instruction Manual for Technomate TM-5500/TM-5000 series
All Technomate receivers are fully tuned with 23 satellites and more than
3500 channels.
How to View Pre-tuned Receivers- Fixed System (non-motorised)
After connecting the receiver to the TV, turn ON the receiver. Press the
s
atellite button on the remote. Select a Satellite of your choice and press OK
o
n the remote. On the left-hand of the screen, select the Channel with the D
sign (not the
$D
sign) using the up and down arrows on the remote. Press
O
K to view.
How to Tune a
Fixed System for One LNB or one Dish
Press the Menu button on the remote. Use the left/right arrows on the
re
mote until you see Installation. Press OK. Use the left/right arrows to
select Satellite List.
A pop-up menu will appear. Use the up/down arrows on the remote and
select a satellite of your choice. Press the red button on the remote to Save
and Exit.
Go to Auto-Search and press OK. Using the left/right arrow
L
ist. Press OK on your selected satellite and OK again. When the signal
quality is at the highest strength, press OK to tune. Wait until the word
"Tuning Finished" appears and press Exit until a clear screen appears.
P
ress the Channel up/down buttons to view a picture by selecting D (Free-
to-air) not
$D
(Scrambled) channels, to view $D channels you need a cam
(decoder) and a viewing card.
H
ow to Setup a Monoblock or DiSEqC Switch (up to 4 LNBs/Dishes)
Press the Menu button the remote. Use the left/right arrows on the remote
find Satellite Setup and press OK. Use the left/right arrows to select
Satellite List. A popup menu will appear. Use the up/down arrows on th
re
mote to select a satellite, for example Hotbird 13 degrees East. Go to
s, select Satellite
s
to
e
2
Advertisement
