Connection To Water Supply; Drain Connection - Hisense HUI66360XCUS User Manual

3. Connect an external supply cord with its three cable wires, and screw them into place.
Also secure the supply cord into place with the strain relief. Tighten the screws to ensure the
supply cord is firmly secured.
4. Replace the protective cover of the junction box.

7. Connection to water supply

Use only the inlet hose supplied with the dishwasher. Do not re-use old or other spare hoses.
The supply pipe must be fitted with a water supply valve. The water supply valve must be easily
accessible, so that the water can be shut off if the dishwasher has to be moved.
Once the installation is complete, turn on the water supply valve and allow the pressure to settle for
a while. Check that all connections are watertight.
Water supply
The machine can be connected to either a cold or a hot (max. 160 °F (70 °C)) water supply. The water
pressure should be 4.2-140 psi (0.03-1.0 MPa).

8. Drain connection

This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height).
This means that the dishwasher can be placed so that the drain hose runs to a lower level than the
bottom of the dishwasher, such as by routing it directly to a floor drain. The dishwasher is fitted with
an integrated anti-siphon device to prevent the machine from being emptied of water during the wash
cycle.
35