Start/Stop; Status Light; If You Want To Load More Dishes; Power Failure - Hisense HUI66360XCUS User Manual

WARNING!
The dishwasher door must not be blocked or closed when opened automatically. Doing so may
damage the door lock mechanism. Wait at least 5 minutes before closing the door.

Start/Stop

Press Start. The display will start counting down, indicating that the dishwasher is ready to start.
Close the door properly within four seconds, otherwise the dishwasher will not start.
Cancel or changing a program
Open the door. If you want to cancel or change the program after starting the dishwasher, press and
hold Start for three seconds (when "Str" is shown on the display).
Add new detergent if the lid of the detergent dispenser has opened. Then select a new program, press
Start and close the door within four seconds.
Time remaining
Once you have chosen a program and options, the time the program took when last used is displayed.

Status Light

The status light on the bottom of the dishwasher indicates that a program has started.
Flashing light
A flashing light indicates that the door has been opened while a program is in progress. If it flashes
when the door is closed, an error has occurred. See the chapter Troubleshooting.
Status light

If you want to load more dishes

Open the door. The dishwasher stops automatically. Add the dishes. Press Start and close the door
within four seconds.
WARNING!
If the door is open, "Str" is shown on the display. If you want the dishwashing program to continue,
press Start and close the door immediately. If you want to cancel the dishwashing program,
press and hold Start for three seconds.

Power failure

If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is lost during drying, the program is interrupted.
1)
You should not load more dishes if the lid of the detergent dispenser has been opened.
16
1)