Select Option; Start/Stop - Hisense HV642E60UK User Manual

Table of Contents

Advertisement

Hygiene 70°
This program is ideal to use where demands on hygiene are extra high, e.g. for baby bottles and
cutting boards. The temperature is high both in the main wash and in the final rinse.
Self-clean
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid. Special dishwasher cleaners are also available on the market. For the removal of limescale
deposits, see Dishwasher tub in the chapter Care and cleaning.
NOTE!
CLn The dishwasher will indicate at regular intervals that Self-clean needs to be run.
Press and hold

Select option

Press the options (
Delayed start
When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed
closed the door.
1. Press
once to activate Delayed start. Press several times, or hold it in, to set the desired number
of hours. The time for Delayed start is shown on the display.
2. Press
. Close the door. The timer counts down and the dishwasher starts after the selected
delay.
If you want to cancel the Delayed start option, open the door then press and hold
Not available for: Self-clean
Speed wash
This option shortens the program time, but uses more energy and water.
Press
to activate the option. The program time is updated on the display.
Not available for: Glass 40°, Hygiene 70°, Self-clean

Start/Stop

Press
. The display will start to flash, indicating that the dishwasher is ready to start. Close the door
properly, otherwise the dishwasher will not start.
Stopping or changing a program
Open the door. If you want to interrupt or change the program after starting the dishwasher, press
and hold
for three seconds.
Top up with new detergent if the lid of the detergent dispenser has opened. Then select a new program,
press
and close the door.
Remaining time
Once you have chosen a program and options, the time the program took when last used is displayed.
16
until CLn is shown on the display to select the program.
,
) to activate them. (The available options vary between programs.)
and
for three seconds.

Advertisement

Table of Contents
loading

Table of Contents