How To Direct The Camera To A Preset Position When The Camera Detects Motion - Axis Q6055 User Manual

AXIS Q6055 PTZ Dome Network Camera
Setup
11. Select SD card from the list of storage options.
12. Click Ok.

How to direct the camera to a preset position when the camera detects motion

This example explains how to set up the camera to go to a preset position when it detects motion in the image.
Make sure the AXIS Video Motion Detection application is running:
1. Go to Settings > Apps > AXIS Video Motion Detection.
2. Start the application if it is not already running.
3. Make sure you have set up the application according to your needs.
Add a preset position:
4. Go to Settings > PTZ and set where you want the camera to be directed by creating a preset position.
Create an action rule:
5. Go to Settings > System > Events > Action rules and add an action rule.
6. Type a name for the action rule.
7. From the list of triggers, select Applications and then select AXIS Video Motion Detection (VMD).
8. From the list of actions, select PTZ Control and then select Preset Position.
9. Select the preset position you want the camera to go to.
10. Click Ok.
How to record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and to
stop one minute after.
Make sure audio turned on:
1. Set up the stream profile to include audio, see How to add audio to your recording.
Make sure the audio detection is set up:
2. Go to Settings > System > Detectors > Audio detection.
3. Adjust the alarm level according to your needs.
Create an action rule:
4. Go to Settings > System > Events and add an action rule.
5. Type a name for the action rule.
6. From the list of triggers, select Detectors and then select Audio Detection.
7. From the list of actions, select Record video and then select Preset Position.
8. Select the stream profile where audio has been turned on or create a new one.
9. Set the pre-trigger time to 5 seconds.
10. Set the post-trigger time to 60 seconds.
10