Led Indicators - Axis Q6055 User Manual

AXIS Q6055 PTZ Dome Network Camera
Specifications
Specifications
To find the latest version of the product's datasheet, go to axis.com > [product] > Support & Documentation.

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
SD card slot
NOTICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see axis.com
Buttons
Control button
The control button is used for:
• Resetting the product to factory default settings. See How to reset to factory default settings on page 13.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.
Power button
Press and hold the power button to temporarily power the product when the dome cover is removed. The power button is also used
with the control button to reset the camera to factory default settings. See page 13.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NO NOTICE NO TICE TICE
Use the supplied midspan.
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after startup completed.
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Flashes amber/red if network connection is unavailable or lost.
16