Summary of Contents for Baxton Studio WES-005-Natural-ET
Page 1
On piece 5, secure the Door rebound device (O) using screws (D). Use the pre-drilled holes for guidance. Attach piece 2 & 3 to piece 5 using wooden dowels (L), cam dowels (A) and cam locks (B). 6 PCS 14 PCS 6 PCS 1 PC 8 PCS...
Page 2
Then attach piece 1 using wooden dowels (L), cam dowels (A) and cam Slot piece 9 into the ridges. locks (B), tighten the cross dowels. Attach piece 7 to piece 2 & 3 using wooden dowels (L), screw (C). Attach the handle (I) to piece 6. On piece 8, attach the plates (P) using screws (M).
Page 3
Put piece 6 to the space between piece 1 & 5. Attach 2 x panel stiffner (W) Attach piece 4 to the unit using wooden dowels (L) & screws (C). Connect door on piece 1 using screw (E). Attach 2 x panel stiffner (W) on bottom of 8 using bar hinges (N).
Page 4
Attach 2 section using screw (J) with tool (S). Attach panel stiffner (T) on piece 9 using screw (D). Attach strip (R) using screw (G). Secure the unit to a wall in your chosen location using wall plugs (Q) and screws (F).
Page 5
The unit should now be assembled and ready to use.