Page 1
Attach the runners K to pieces 2 and 3 as shown. Use screws (D). Then attach pieces 2 and 3 to Top panel 1 using wooden dowels (F), cam dowels (A) and cam locks (B). 8 PCS 8 PCS 4 PCS 6 PCS 8 PCS 1 PC...
Page 2
Slot in piece 5 to the built-in ridges. Then add piece 4 to the unit using wooden dowels (F), Screw (C). Attach piece 12 & 13 to piece 11 using screw (J) with tool (E). Attach piece 12 & 13 to piece 11 using screw (J) with tool (E).
Page 3
Attach 2 section using screw (I) with tool (E). Attach pieces 6, 7 & 8 using screws (C). Make sure that the built-in ridge is facing inwards and at the bottom. ×2 On piece 10, attach the door handles (H) using screws (G). Slot piece 9 into the ridges.
Page 4
Turn the drawer upside down. Line up the holes on the outside pieces Insert the drawers. with the holes on the runners (KDR & KDL), secure to the drawer using screws (D) The unit should now be assembled and ready to use.