Related Manuals for Better Bathrooms BeBa 27200
Summary of Contents for Better Bathrooms BeBa 27200
- Page 1 Product Code – BeBa_27200 - BeBa_27201 Nerja 60cm Vanity - Concrete • Multi-person assembly • We always recommend using professional tradespeople to install your product V1_14.12.2020...
-
Page 2: Congratulations On Your Purchase
Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day. - Page 3 PARTS / DIAGRAMS A – TOP PANEL B – RIGHT SIDE PANEL C – LEFT SIDE PANEL D – SUPPORT BAR E – BOTTOM PANEL F – RIGHT DOOR - DOOR INC. DOOR HINGES X 2...
-
Page 4: Tools Required
Tools required Troubleshooting Door not straight / not closing See hinge adjustment guide above Leaking Check sealant, reapply if necessary... -
Page 5: Installation
Installation Please spend 5 minutes reading this section before commencing with the installation of your new furniture 1. Should any of your items have a defect, please do not install as returns will not be accept once fitted. 2. We advise that you use a qualified person to install your units, as any issues relating to poor fitting will not be accepted by the supplier. - Page 7 İnfo : 1- Place the wall hanging brackets against the wall and mark the drill holes, so that they are aligned with the measurements of the unit and are level. 2- To do this use a tape measure and spirit level.
- Page 8 İnfo : 1- Drill the holes into the wall at 7 mm diameter and to a depth of 100 mm. 2- Apply a small amount of silicone into the hole. 3- Insert the dowels (Wall plugs) into the holes and tap flush to the wall surface using a hammer.
- Page 12 İnfo : Installing a faucet before the sink is attached to the module with silicone makes your assembly work easier. Apply a bead of silicone to the bottom edge of the base where it sits onto the unit.
-
Page 14: Hinge Adjustment
Hinge Adjustment... - Page 15 Maintenance Please note that although these units have been designed to give years of pleasure and satisfaction, you will help maintain the original beauty of your bathroom by following these guidelines. Melamine, vinyl and foil wrapped doors Occasional marks, can in most cases, be removed with a soft damp cloth. More persistent marks can be removed using a non-silicone-based furniture cleaner.
- Page 16 Product Code – BeBa_27203 Nerja 60cm Mirror – Concrete • Multi-person assembly • We always recommend using professional tradespeople to install your product V1_14.12.2020...
- Page 17 Congratulations on your purchase And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
- Page 19 Installation Please spend 5 minutes reading this section before commencing with the installation of your new furniture 1. Should any of your items have a defect, please do not install as returns will not be accept once fitted. 2. We advise that you use a qualified person to install your units, as any issues relating to poor fitting will not be accepted by the supplier.
- Page 20 İnfo : 1- Measure the distance centre to centre of the fixing points on the rear of the mirror and mark these points on the wall at the required height, ensuring they are level. 2- 2- To do this use a tape measure and spirit level.
- Page 21 İnfo : 1- Drill the holes into the wall at 7 mm diameter and to a depth of 100 mm. 2- Apply a small amount of silicone into the hole. 3- Insert the dowels (Wall plugs) into the holes and tap flush to the wall surface using a hammer.
- Page 26 Maintenance Please note that although these units have been designed to give years of pleasure and satisfaction, you will help maintain the original beauty of your bathroom by following these guidelines. Carcass components Do not use polish on any surfaces. A damp cloth with soapy water will clean off most marks or spills. On no account should any spillage, even water, be allowed to lie of the surface.
Need help?
Do you have a question about the BeBa 27200 and is the answer not in the manual?
Questions and answers