Unitronics USL-050-B05 Installation Manual page 12

Connecting the Display to a UniStream
1. After the device is powered on,
select the Network tab at the
bottom of the screen.
2. Enter the IP Address for the VNC
connection, a password if one is
required by the VNC server, edit
the timeout if required, and then
tap Apply.
To add connections, tap the
Connection scroller and repeat the
steps above
1. When a connection is defined,
the Connect button is activated;
tap it to initiate the VNC
connection.
With Exit
Selecting the With Exit option places
an Exit VNC button on screen during
a VNC session. This can be tapped in
order to exit to UniApps.
12
®
UniStream ® Display
Unitronics