Bosch 06033A4000 Instructions Manual page 14

14 | English
(6) Handle (insulated gripping surface)
a)
(7) Sanding sheet
(8) Alignment aid for sanding sheet
(9) Screws for sanding disc
(10) Sanding disc holder
(11) Extraction outlet
(12) Filter element (microfilter system)
a)
(13) Extraction hose
(14) Wing nut
(15) Screw for auxiliary handle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Random orbit sander
Article number
Orbital stroke rate preselec-
tion
Rated power input
No-load speed n
0
No-load orbital stroke rate
Orbit diameter
Sanding pad diameter
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Choosing the Sanding Sheet
Select a sanding sheet with a grit suitable for how much material you want to remove. Bosch sanding sheets are suitable for
paint, wood and metal.
Use
Sanding down – Coarse sanding work with a
(coarse sand- high material removal rate
ing)
– Removing old paint
Preparing – Light sanding
(intermediate
– Abrading surfaces for further
sanding)
processing later on
Fine sanding – Intermediate paint sanding
– Abrading flaws in the paintwork
1 609 92A 7V9 | (27.05.2022)
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
a)
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power
level 94 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-4:
a
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
PEX 400 AE
power tool is used for other applications, with different ap-
PEX 4000 AE
plication tools or is poorly maintained, the vibration level
3 603 CA4 ...
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
●
working period.
To estimate vibration and noise emissions accurately, the
W 370
times when the tool is switched off or when it is running but
−1
min 2000–13,000
not actually being used should also be taken into account.
−1
min 4000–26,000 This may significantly reduce vibration and noise emissions
over the total working period.
mm 5
Implement additional safety measures to protect the oper-
mm 125
ator from the effects of vibration, such as servicing the
kg 1.9
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
/II
Assembly
u
Application
– Sanding down old paint, varnish and filler
– Removing thin paint
– Pre-sanding rough, unplaned surfaces
– Sanding uneven surfaces to make them
even
– Removing marks left by coarse sanding
– Repairing surfaces before applying paint or
varnish
– Removing fibres from the surface
– Fine sanding before staining
– Abrading primer before painting
(triax vector sum) and uncertainty K
h
2 2
= 8.0 m/s , K = 1.5 m/s ,
Pull the plug out of the socket before carrying out any
work on the power tool.
Grit
Extra 40
coarse
Coarse 60
Medium 80
Fine 120
Very fine 180
Extra fine 240
Bosch Power Tools