U I A General Warnings; U I A Waiver Of Liability; U I A Fundamental Safety Rules - Mitsubishi Electric CLIMAVENETA BRAN2 0021M Installation, User And Maintenance Manual

GENERAL WARNINGS
These appliances have been designed to chill and/or
heat water and must be used in applications compatible
with their performance characteristics; these appliances
are designed for residential or similar applications.
Incorrect installation, regulation and maintenance or
improper use absolve the manufacturer from all liability,
whether contractual or otherwise, for damage to people,
animals or things.
Only those applications specifically indicated in this list
are permitted
Read this manual carefully. All work must be carried
out by qualified personnel in conformity with legislation in
force in the country concerned.
The warranty is void if the above instructions are not
respected and if the unit is started up for the first time with-
out the presence of personnel authorised by the Company
(where specified in the supply contract) who should draw up
a "start-up" report.
WAIVER OF LIABILITY
This publication is the sole property of Climaveneta. Any
reproduction or disclosure of such is strictly prohibited with-
out the written authorisation of Climaveneta.
This document has been prepared with maximum care and
attention paid to the content shown. Nonetheless, Cli-
maveneta waives all liability deriving from the use of such
document.
Read this document carefully.
FUNDAMENTAL SAFETY RULES
When operating equipment involving the use of electricity and water, a number of fundamental safety rules must be observed,
namely:
The unit must not be used by children or by unfit per-
sons without suitable supervision.
Do not touch the unit with bare feet or with wet or
damp parts of the body.
Never perform any cleaning operations before having
disconnected the unit from the mains power supply.
Do not modify safety or control devices without authori-
sation and instructions from the manufacturer.
Do not pull, detach or twist the electrical cables coming
from the unit, even when disconnected from the mains
electricity supply.
Do not open doors or panels providing access to the
internal parts of the unit without first ensuring that the
mains switch is in the off position.
Do not introduce pointed objects through the air
intake and outlet grills.
Do not dispose of, abandon or leave within reach of
children packaging materials (cardboard, staples, plastic
bags, etc.) as they may represent a hazard.
The BRAT/N2 0021÷0121 appliances are supplied with-
out the main switch.
Power supply to the unit must be disconnected using a
switch with suitable characteristics, to be supplied and
installed by the installer.
The documents supplied with the unit must be consigned
to the owner who should keep them carefully for future con-
sultation in the event of maintenance or service.
When the items are consigned by the carrier, check that the
packaging and the unit are undamaged.
If damage or missing components are noted, indicate this on
the delivery note. A formal complaint should be sent via fax
or registered post to the After Sales Department within eight
days from the date of receipt of the items.
All repair or maintenance work must be carried out by the
Company's Technical Service or qualified personnel follow-
ing the instructions in this manual.
Do not modify or tamper with the appliance as this may cre-
ate situations of danger; in such cases the manufacturer of
the appliance is not liable for any damage caused.
All work must be performed, components selected and
materials used professionally and in complete accordance
with the legislation in force in material in the country con-
cerned, and considering the operating conditions and
intended uses of the system, by qualified personnel.
Respect safety distances between the unit and other
equipment or structures. Guarantee adequate space for
access to the unit for maintenance and/or service opera-
tions (see the figure on page 5).
Power supply: the size of the electrical cables must be
adequate for the power of the unit and the power supply
voltage must correspond with the value indicated on the
respective units. All units must be earthed in conformity
with legislation in force in the country concerned.
Some terminals in the electrical panel may be pow-
ered even after the unit is disconnected.
Make sure power is not connected before proceeding.
Water connections should be carried out as indicated in
the instructions to guarantee correct operation of the
unit.
Add glycol to the water circuit if the unit is not used dur-
ing the winter or the circuit is not emptied.
Handle the unit with the utmost care (see weight distrib-
ution table) to avoid damage.
U I A
U I A
U I A
BRAT2 - BRAN2 EN 3