Mitsubishi Electric CLIMAVENETA BRAN2 0021M Installation, User And Maintenance Manual page 24

SELECTING THE OPERATING MODE
There are three different modes:
• Standby mode (StbY)
• Cooling mode (COOL)
• Heating only mode (HEAT)
For example, to switch operation from StbY to COOL.
To change the operating mode, press and hold the mode
button for at least 2 seconds.
A scroll menu will start flashing with the values StbY (stand-
by) and COOL (cool).
Use the up and down buttons to select the desired operating
mode.
The unit will automatically return to the main display and the
Stby LED, previously on, will now be off and the COOL LED
will be on.
24 BRAT2 - BRAN2 EN
SETTING THE SET POINTS
As an example, the Set Point in COOL mode will be
changed from 12.0 degrees centigrade to 12.5 degrees
centigrade.
To change the set point, starting from the main display,
press the set button.
Pressing the set button once displays the various directo-
ries. Scroll the menu using the up and down buttons until
reaching the SP directory.
To enter the SP directory press the set button.
The active mode will be displayed (COOL).
Taking the example of changing the set point for the operat-
ing mode. Press the SET button.