Xiaomi Mi Wireless Charging Pad Manual

Product Overview

Mi Wireless Charging Pad is a universal wireless charger you can use at home or at work. The charging base has a metallic finish, and a non-slip silicone material has been applied to its top and boom surfaces. The wireless charger is equipped with a USB Type-C port. Simply place your mobile phone on its surface to charge wirelessly.

How to Use

1. Please use the factory-supplied USB Type-C data cable with a power adapter, to connect the Mi Wireless Charging Pad. Once connected, the product will be ready to use after the green LED has blinked three times.
   Adapter Requirements:
   1. 5 V/1 A adapters are not supported.
   2. 5 W regular charging is supported by 5 V/2 A adapters.
   3. 10 W fast charging is supported by QC 2.0/QC 3.0 adapters.
2. Place a Qi-compatible device in the center of the Mi Wireless Charging Pad, to start charging automatically. When the charger is in normal state there is a constant green LED light.
   
3. Keep your phone centered on the Mi Wireless Charging Pad while charging. Adjust the position of your phone if it is not charging, the green LED light should come on and your phone's status should change to "Charging" (Please refer to figure below for placement).
   
4. If the LED light is blinking green, the Mi Wireless Charging Pad has encountered an error and protective measures have been activated. Please check if any metal objects have been placed on the charging pad. If so, please remove them and check if the pad resumes charging. If the problem persists, please contact the sales staff.

Precautions

• Do not put pressure on this product, and prevent any impact.
• Do not disassemble nor modify it on your own.
• Keep the product away from fire and do not submerge it in water.
• Do not use the wireless charger in severely hot, humid or corrosive conditions to avoid damage to the circuit.
• Do not place cards equipped with a magnetic strip or chip (such as ID and ATM cards) close to the product, in order to avoid possible card reading failures.
• Keep a distance of at least 7.87 in between implanted medical devices (pacemakers, cochlear implants, etc.) and the wireless charger, to avoid potential interference with the medical devices.
• This wireless charger is not a suitable children's toy, please keep it away from them. In order to achieve a beer charging performance, please avoid using it in places with high temperatures or lack of heat dissipation (such as bed sheets, mouse pads, etc.).

Specifications

Product Name: Mi Wireless Charging Pad
Model: WPC01ZM
Input Port: USB Type-C
Input: 5 V 2 A / 9 V 1.6 A
Output: 5 V 5 W Max. 9 V 10 W Max.
Transmission Distance: ≤ 0.16 in
Operating Temperature: 32°F ~ 95°F

Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zimi Corporation (a Mi Ecosystem company)
Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, China

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Xiaomi Mi Wireless Charging Pad Manual