Brightness Control - Honda Fit 2013 Online Reference Owner's Manual

Main Menu

Brightness Control

Select/Reset Knob
Table of Contents
When the parking lights are turned on and the
ignition switch is in ON
(select/reset) knob to adjust instrument
panel brightness.
Brighten: Turn the knob to the right.
Dim: Turn the knob to the left.
You will hear a beep when the brightness
reaches minimum or maximum. The
information display will return to its original
state several seconds after you adjust the
brightness.
■
Brightness level indicator
The brightness level is shown on the
information display while you are adjusting it.
uuOperating the Switches Around the Steering WheeluBrightness Control
1Brightness Control
( w , you can use the
Pressing the
If you turn the knob to the right until the brightness
display is up to max, the beeper sounds. This cancels
the reduced instrument panel brightness when the
exterior lights are on.
The brightness can be set differently for when the
exterior lights are on, and when they are off.
knob switches the display.
99