Table of Contents
Advertisement
Main Menu
Hold-Down Wire
Inspection Window
Front Turn Signal Light Bulbs
When replacing, use the following bulbs.
Front Turn Signal Light: 21 W (Amber)
Socket
Bulb
Table of Contents
5. Reinstall the hold-down wire. Hook the end
of the wire on the knob in the slot.
u
You can see if the hold-down wire is in
the right place from the inspection
window.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the
bulb.
1. Turn the socket to the left and remove it.
2. Push in the old bulb, rotate to the left until
it unlocks, and remove.
3. Insert a new bulb.
uuReplacing Light BulbsuFront Turn Signal Light Bulbs
213
Advertisement
Chapters
Table of Contents
