Operating Instructions - Frigidaire FHTE083WA1 Use & Care Manual

14

OPERATING INSTRUCTIONS

NOTE
The following instructions are for the
control panel. The same instructions can be
used for the remote control.
TO TURN UNIT ON:
DO THIS:
PRESS ON/OFF BUTTON
YOU WILL SEE:
NOTE: The unit will run in Cool mode with
Eco feature and Auto fan speed setting when
used for the first time. With the Eco feature,
when the room temperature is below the set
temperature, the fan will continue to run for 3
minutes after the compressor shuts o . The
fan then cycles on for 2 minutes at 10 minute
intervals until the room temperature is above
the set temperature, at which time the
compressor turns back on. Eco feature can be
activated or deactivated by pressing Eco
button, but it is invalid in fan only mode.
AUTO FEATURE:
DO THIS:
PRESS MODE BUTTON
CHOOSE AUTO
YOU WILL SEE:
This mode is a fixed combination of Cool
mode and Auto fan speed setting. In this
mode, the fan speed can not be selected
manually.
COOL FEATURE:
PRESS MODE BUTTON
CHOOSE COOL
YOU WILL SEE:
In this mode, the fan remains on all of the time
with the compressor cycling on and o when
the desired room temperature is reached.
TO CHANGE TEMPERATURE SETTlNG:
PRESS
PRESS
DO THIS:
DO THIS:
TO RAISE
TO LOWER