Output Resolution - Sony ZV-1M2 Help Manual

Help Guide
Digital Camera
ZV-1M2
HDMI Output Settings (movie)
Sets the video and audio to be output to an external recorder/player connected via HDMI when shooting a movie.
Use a Premium High Speed HDMI Cable (sold separately) to output 4K movies.
MENU → (Setup) → [External Output] → [
1
Menu item details
Rec. Media dur HDMI Output:
Sets whether or not to record movies on the memory card of the camera during HDMI output.
[On]: Records movies on the memory card of the camera, and outputs the movies to the HDMI-connected device at the
same time.
[Off(HDMI Only)]: Does not record movies on the memory card of the camera, and outputs movies only to devices
connected via HDMI.

Output Resolution:

Sets the resolution of the image that will be output to another device connected via HDMI when [Rec. Media dur HDMI
Output] is set to [On]. ([Auto]/[2160p/1080p]/[1080p]/[1080i])
4K Output Set.(HDMI Only):
Sets the frame rate and color depth of 4K movie output to another device connected via HDMI when [Rec. Media dur
HDMI Output] is set to [Off(HDMI Only)]. ([30p 8bit]/[25p 8bit]/[24p 8bit])
Time Code Output:
Sets whether or not to output the time code and user bit to another device connected via HDMI. ([On] / [Off])
Time code information is transmitted as digital data, not as an image displayed on the screen. The connected device can
then refer to the digital data in order to recognize the time data.
REC Control:
Sets whether to start or stop recording on the external recorder/player remotely by operating the camera when the
camera is connected to an external recorder/player. ([On] / [Off])
Hint
With [REC Control] set to [On],
recorder/player, and
Note
A 4K movie is not output to the connected 4K-compatible device during slow-motion/quick-motion shooting.
When [Rec. Media dur HDMI Output] is set to [Off(HDMI Only)], [HDMI Info. Display] becomes temporarily set to [Off].
When [Rec. Media dur HDMI Output] is set to [Off(HDMI Only)], the counter does not move forward (the actual recording time is
not counted) while the movie is being recorded on an external recorder/player.
[REC Control] can be used with external recorders/players that support the [REC Control] function.
When [Time Code Output] is set to [Off], you cannot set [REC Control].
Even when (REC) is displayed, the external recorder/player may not work properly depending on the settings or status of
the recorder/player. Check if the external recorder/player works properly before use.
When [Time Code Output] is set to [On], images may not be output properly to the TV or recording device. In this case, set [Time
Code Output] to [Off].
(STBY) is displayed when a recording command is ready to be sent to the external
(REC) is displayed when a recording command is being sent to the external recorder/player.
HDMI Output Settings] → desired setting item.
304