Sony ZV-1M2 Help Manual page 243

Help Guide
Digital Camera
ZV-1M2
Fn Menu Settings
The Function menu is a menu of 12 functions that is displayed at the bottom of the screen when you press the Fn
(Function) button in the shooting mode.
You can register 12 functions to the Function menus for still image shooting and movie shooting, respectively.
The following is the procedure for changing [Drive Mode] in the still image function menu to [
To change the movie function menu, select a movie function menu item in Step 2.
MENU → (Setup) → [Operation Customize] → select [Fn Menu Settings].
1
Select (Drive Mode) from among the 12 still image function menu items using the
2
top/bottom/left/right side of the control wheel, and then press the center.
Move to the screen showing [
3
select [ Grid Line Display] and press the center of the control wheel.
( Grid Line Display) will be displayed in the former location of
menu.
Hint
When [Touch Operation] is set to [On] and [Shooting Screen] is set to [On], you can also open [Fn Menu Settings] by holding
down the icon in the function menu.
Related Topic
Fn (function) button
Grid Line Display] using the left/right side of the control wheel. Then,
5-049-603-11(1) Copyright 2023 Sony Corporation
243
Grid Line Display].
(Drive Mode) in the Function