Sony ZV-1M2 Help Manual page 305

Hide thumbs Also See for ZV-1M2:
Table of Contents

Advertisement

When shooting 4K movies with [Rec. Media dur HDMI Output] under [
recorded at the same time, the movie cannot be output to a device connected via HDMI. To output movies using HDMI, set [
Proxy Recording] to [Off]. (At this time, if [Rec Frame Rate] is set to anything other than [24p], the image will not be displayed on
the camera monitor.)
When [HDMI Info. Display] is set to [Off], images are displayed on both the HDMI-connected device and the camera monitor.
However, when recording the following types of movies with [Rec. Media dur HDMI Output] set to [On], images are not displayed
on the monitor of the camera.
XAVC S 4K 30p (when [
XAVC S HD 120p
Slow-motion and quick-motion movies with [
When [
File Format] is set to [XAVC S 4K] and an HDMI connection is used, the following functions are partially restricted.
Subject Recog in AF
Face Priority in Multi Metering
Proxy Recording] is set to [Off])
Frame Rate] set to [120fps]
5-049-603-11(1) Copyright 2023 Sony Corporation
HDMI Output Settings] set to [On], if a proxy movie is
305

Advertisement

Table of Contents
loading

Table of Contents