Page 1
Software Utility CD Screw Driver (1C016) 2.4 mm Technical Support WP-5000-CE7 User Manual CD:\WinPAC_AM335x\Wp-5231\Document\ http://ftp.icpdas.com/pub/cd/winpac_am335x/wp-5231/document/ Configuring the Boot Mode Before starting any installation, be sure that the switch is placed in the “0” position. E-mail: service@icpdas.com WP-5231-CE7 Quick Start, v1.1...
Page 2
) to PWR and GND terminals. iv. Connect the monitor to the VGA port. v. Turn on the WinPAC Using PAC Utility to Manage the WinPAC Step 1: Double-click the PAC Utility shortcut on the desktop E-mail: service@icpdas.com WP-5231-CE7 Quick Start, v1.1...
Page 3
Step 2: Configure IP address (DHCP), FTP Server, Auto Execution files…, etc Step 3: Reboot the WinPAC for changes to take effect Changing the User Interface Language Step 1: Click Start menu, point to Settings, click Control Panel, and then click Regional Settings E-mail: service@icpdas.com WP-5231-CE7 Quick Start, v1.1...
Page 4
For more information on how to install the XV-Board, please refer to section “2.2. Installing the XV-Board” in “WP-5000-CE7 User Manual” For more details about XV-Board expansion I/O modules, please refer to http://www.icpdas.com/root/product/solutions/hmi_touch_moni tor/touchpad/xv-board_selection.html E-mail: service@icpdas.com WP-5231-CE7 Quick Start, v1.1...
Need help?
Do you have a question about the WP-5231-CE7 and is the answer not in the manual?
Questions and answers