Table of Contents
Advertisement
5.
Fit protective caps to the battery terminals.
6.
Slide the battery further to make room for
the second battery.
7.
Slide the second battery into the tray.
8.
Connect the red-band terminal of the
interlink cable to the positive terminal.
V2000 Battery Backup System – Installation Guide
U-0456-0199.docx – Issue: 03 complete, approved
Page 14 of 20
Battery terminal fitted with protective cap.
(Protective cap model may vary.)
Advertisement
Table of Contents
Need help?
Do you have a question about the V2000 and is the answer not in the manual?
Questions and answers