Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co,;Ltd
AT+ DMCFG Setting/Querying dormancy time configuration (restart to take effect)
AT+DMCFG=？
10
AT+DMCFG=Value
Example：AT+DMCFG=0
AT+RSCFG Setting/Querying the parameter settings of auto restart
(reboot valid)
AT+RSCFG=?
11
AT+RSCFG=Value
Example：AT+RSCFG=0
Note: This parameter can be used for node disconnection detection. It is recommended to open it.
AT+UBCFG Setting /Querying the baud rate parameter (restart to take effect)
AT+UBCFG=?
12
AT+UBCFG=Value
Example：AT+UBCFG=7
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
Description:
Gets dormancy time configuration
Response:
DMCFG:2~60
Description:
Value: dormant time, per unit second (S).
Note: When the value is smaller than 2, system will change it to 2. (min.2s).
Description:
Gets the auto restart parameter settings
Response：
RSCFG:0
Description:
Value：0 or 60~65535（S）
When the value is less than 60, the system judges as 60; when the value is 0, it does not
restart
Description：
Obtains the baud rate parameter
Response：
UBCFG:7
Description：
Value:0~7
0：1200
1：2400
2：4800
3：9600
4：19200
5：38400
6：57600
7：115200
E70-433NW30S user manual
17
Advertisement
Table of Contents
