Ebyte E70-433NW30S User Manual page 16

Chengdu Ebyte Electronic Technology Co,;Ltd
Example：AT+HELP
AT+ WMCFG Setting /Querying device working mode (restart to take effect)
AT+ WMCFG =?
4
AT+ WMCFG =Value
Example：AT+ WMCFG =4
Note: 1. After setting a new mode, it needs to be reset or power off and restart
AT+DINFO Get device information
AT+DINFO=SELFS
5
AT+DINFO=SELFE
Example：AT+DINFO=SELFE
AT+ TFOCFG Setting/Querying output data format settings (restart to take effect)
AT+ TFOCFG=？
6
AT+ TFOCFG=Value
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
Null
Response:
All instructions and help information
Description:
Gets current working mode
Response：
WMCFG：4
Description:
Value：0~4
0，Coordinator；
1, Normal node;
2, Dormant Node；
3, Sleep mode；
4, (factory default), Pin control
Description:
Get the short address itself and return by UART.
Description:
Get the long address itself and return by UART
Description:
Get current output format settings
Response：
TFOCFG:0
Description:
Value：0~7
0：Output: valid data (transparent transmission)）
1: Output: Valid Data +Long Address of the transmitter
2：Output: Valid Data +Short Address of the transmitter
3：Output: Valid Data+RSSI
4：Output：Valid Data+transmitter's Long Address+transmitter's Short Address
E70-433NW30S user manual
15