Ebyte E70-433NW30S User Manual page 14

433mhz 1w star network smd wireless module

Hide thumbs Also See for E70-433NW30S:

Table of Contents

Chengdu Ebyte Electronic Technology Co,;Ltd

Then enter "AT+WMCFG=1" with line breaks to configure the device as the normal mode, as shown in Figure 5-5:

Then enter "AT+RSTART" to restart the device with a line break. The normal node configuration is complete.

As shown in Figure 5-6:

Start up a Network and transmit data

When the configuration is complete, the coordinator restarts. when the LINK pin is asserted low, indicating that the

coordinator has started and is running. After an normal node device starts up, it will have a network access time of 5

to 20 seconds. When the network access is completed sucessfully, the LINK pin is in low level.

Data transmission as below:

Chengdu Ebyte Electronic Technology Co,;Ltd

Figure 5-4

Figure 5-5

Figure 5-6

E70-433NW30S user manual

Table of Contents