Chapter 2 Assembling the stand
Environmental requirements
Considerations when assembling the stand
The stand requires assembly. Consult the SMART electric height-adjustable mobile stand illustrated
installation instructions (smarttech.com/kb/171843) included with the stand for assembly instructions.
Warning
Failure to follow the installation instructions included with the stand could result in personal injury or
product damage.
Caution
Ensure any display you install on the stand weighs between 77 lb. (35 kg) and 200 lb. (91 kg).
Environmental requirements
Before installing the stand, refer to the following environmental requirements.
Caution
Do not operate the stand immediately after moving it from a cold location to a warm location.
l
Allow the stand to reach room temperature before operation to prevent possible product
damage.
Do not place the stand in hot locations, such as near heating equipment.
l
smarttech.com/kb/171845
12
13
12