Noise Emission; Preliminary Inspection; Product Information - FLOWTECH flowboost K.H Operation And Maintenance Manual

6
General
This instruction manual will help you not only to understand how the appliance works, but also to get to know
its possible applications.
This user manual contains important recommendations that are necessary for the appliance to be properly
and economically operated. These recommendations must be complied with in order to ensure reliability and
durability, and to avoid any risks of accidents resulting from improper use.
The appliance must be used for the intended applications and within the limits described in the following
paragraphs.
The activities related to handling, installing, using, servicing and disposing of the product pose risks for human
safety and for the environment that cannot be eliminated through construction.
The main residual risks are electrical (electrocution) and mechanical ones (injuries caused by sharp
edges, abrasions or crushing). All operations must be carried out with the utmost attention only by expert,
professional staff, equipped with appropriate personal protective equipment and suitable tools, when the
machine is disconnected. Failure to comply with the instructions provided in this manual and proper working
practices will increase health risks. The manufacturer accepts no responsibility in case of accident or damage
caused by negligence, improper use of the electric pump, or failure to follow the instructions described in this
manual, or use in conditions other than those permitted.
In the supply conditions, the electric pump has no moving or normally live parts accessible from the outside.
The user must not disassemble the electric pump completely or partially, nor make any changes or tamper
with the product. If removed during installation, guards must be refitted immediately.

Noise emission

Noise emission is mainly influenced by the size of the motor and pump.

Preliminary inspection

Remove the appliance from the packaging and check that it is intact. Also check whether the rating plate
details match the desired ones. In case of any discrepancies, contact the supplier immediately, specifying
the nature of the defects. If in doubt about the machine's safety or integrity, do not use it and contact a
professional service centre.

Product information

The serial number is shown on the rating plate. It is important to provide these details when requesting
service or support and spare parts.
Please note that the information provided on the rating plate may be arranged differently from what is shown.
Some information may not be available, depending on the model considered.
On the surface of the pump, there may be other plates, depending on the model, that identify its features,
compliance with rules and regulations or installation, use and disposal provisions.
Pay attention to the risks associated with the product installation, maintenance and disposal.
The surfaces of the electric pump may reach high temperatures based on the temperature of the pumped
liquid. Direct contact and liquid spills may cause burns and injury.
The direction of rotation of the functional parts is indicated by the marking (arrow) and/on the motor fan
cover.