Table of Contents
Advertisement
All manuals and user guides at all-guides.com
4 Operating Instructions
4.1 Display Panel Controls
On-Off Button
Press
to turn on or off the unit.
NOTE: The Energy Saver feature will automatically turn on in Cool, Dry, and Auto mode.
Up and Down Button
Press or hold either Up
or Down
button until desired temperature is seen on the digital
display. This temperature will be automatically maintained anywhere between 62 °F (17° C) and 86° F
(30° C). Pressing and holding both Up and Down buttons for 3 seconds, will change the display from ℉ to
℃.
Mode select Button
To choose the operating mode press Mode
. Each time you press the button a mode is selected in a
sequence that goes from Auto, Cool, Heat, Dry, to Fan. The indicator light beside the mode button will be
illuminated and remain on once the mode is selected.
NOTE: The unit will automatically turn on the Energy Saver function under Cool, Dry, Auto (only Auto-
Cooling and Auto Fan) modes per Energy Stars' requirement.
Fan speed Button
To select the speed of the fan press Fan Speed
which cycles through four steps- Auto, Low,
Medium, or High. Each time the button is pressed the fan speed mode is shifted.
NOTE: The fan speed can't be adjusted in certain modes (Dry, and Heat on some models.)
17
Advertisement
Table of Contents
