Spark Arrestor; General Maintenance - Ryobi RLM46190YB Original Instructions Manual

Petrol self-propelled lawn mower
Table of Contents

Advertisement

EMPTYING THE GRASS CATCHER
See Fig. 12.
1. Stop the mower, and wait for the blade to come to a
complete stop.
2. Lift the rear discharge door.
3. Grasp the grass catcher by its handle, and lift to remove
from the mower.
4. Empty the grass clippings.
5. Lift the rear discharge door, and reinstall the grass
catcher.
WARNING
Use caution when lifting or tilting the product for
maintenance, cleaning, storage, or transportation. The
blade is sharp, even though the engine is shut off, the
blades can still be moved. Keep all body parts away from
the blade while it is exposed.
MAINTENANCE
WARNING
If the product is not maintained correctly, the life span of
the product may be reduced, and built-in safety features
may not function correctly, thus increasing the potential
for serious injury. Keep the product in good working
condition.
WARNING
Before performing any maintenance, stop the product,
allow the blade to come to a complete stop, and
disconnect the spark plug wire from the spark plug.
Failure to heed this warning could result in serious
personal injury.
WARNING
When servicing, use only original manufacturer's
replacement parts. Use of any other parts may create a
hazard or cause product damage.

GENERAL MAINTENANCE

You may make adjustments and repairs described in this
manual. For other repairs, contact an authorised service
centre.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types
of commercial solvents and may be damaged by their
use. Use clean cloths to remove dirt, dust, oil, or grease.
Periodically check all nuts and bolts for proper tightness
to ensure safe operation of the product.
Remove any buildup of grass and leaves on or around
8
the engine and engine cover. Occasionally wipe the
mower clean with a dry cloth. Do not use water to clean
the product.
Frequently check the grass catcher for wear or
deterioration.
WARNING
Do not, at any time, let brake fluids, gasoline, petroleum-
based products, or penetrating oils come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal
injury.

SPARK ARRESTOR

The product is fitted with a spark arrestor (which is
inside the exhaust).
NOTE: It is recommended that the spark arrestor is only
cleaned only at an authorised service centre.
LUBRICATION
All of the bearings in the product are lubricated with a
sufficient amount of high grade lubricant for the life of
the unit under normal operating conditions. Therefore, no
further bearing lubrication is required.
REPLACING THE CUTTING BLADE
See Fig. 13.
WARNING
Always protect hands by wearing heavy-duty gloves and
wrapping the cutting edges of the blade with rags and
other materials when performing blade maintenance.
Improper handling of blade could result in serious
personal injury.
Be careful when replacing the mower blade. Ensure that
your fingers do not get caught between the moving blade
and the fixed parts of the product.
For best results, the mower blade must be kept sharp.
Replace a bent or damaged blade immediately.
WARNING
Use only replacement blades approved by the
manufacturer. Using a blade that is not approved by
the manufacturer of the product is hazardous and could
result in serious injury, damage to the product, and will
void your warranty.
WARNING
Drain the fuel first before tilting the mower to replace the
blade.
User Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents