Table of Contents
Advertisement
IMPORTANT
When the phone is ringing, avoid holding the earpiece too close to your ear as it may
damage your hearing.
NOTE
If auto pick up mode (see page 34) is on, simply lift up the handset from its base to
answer the call. The default setting is Off. See all "Default settings" on page 40.
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
3.7
Adjust volume
1. During a call, press
shown in the handset display.
3.8
Mute
Mute the microphone so that you can talk to someone else in the room without your caller
hearing you.
1. During a call, press
b
2. Press
again to turn the microphone back on.
3.9
End a call
e
1. Press
.
After you hang up, the duration the phone is off-hook is displayed for 2 seconds.
NOTE
If auto hang-up is off (see page 34) you must press
is On.
3.10
Switch handset on/off
e
1. Press and hold
3.11
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you
to make internal calls, transfer external calls from one handset to another and use the
conference option.
3.11.1 Call another handset
*
1. Press and hold
•
If you have two handsets, the other handset is called automatically.
•
If more than two handsets are registered to the base, the first handset number is
displayed. Scroll
*
press
to ring all handsets.
e
2. Press
to hang up.
Using the phone
u
d
or
to adjust the earpiece or hands-free volume. The level is
b
. The microphone is muted.
to switch the handset on or off.
.
d
the number of the handset you want to call and press
e
to end the call. The default setting
M
or
17
Advertisement
Table of Contents
