Motorola TD1 Manual page 8

Connecting the base
1. Plug the telephone line cord into the socket marked
2. Plug the power adaptor into the socket marked
plug the other end into the mains power wall socket. Switch on the mains power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the rechargeable
Ni-MH battery cells supplied. Please note the '+' and '-' markings inside the battery
compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the base to
charge for at least 16 hours continuously.
4. When the handset is fully charged,
other end of the telephone line cord (make sure that one end is already plugged into
the base) into the telephone wall socket.
8
on the underside of the base.
on the underside of the base and
icon will appear steady on the display. Plug the
1
Press down
2
Slide
Getting started