Using The Phone; Switch The Handset On / Off; Calls; Make A Call - Motorola T2 Manual

3. Using the phone

NOTE
The handset will automatically time the duration of all external calls. The call timer will
display after the first 10 seconds of the call. When the call ends, the total duration of the
talk time stays on the display for 3 seconds.
3.1

Switch the handset on / off

Press and hold n to switch the handset on or off.
3.2

Calls

3.2.1

Make a call

1. Press h.
2. When you hear the dial tone, dial the number.
3.2.2

Preparatory dialling

1. Dial the number first. If you make a mistake press
2. Press h to dial.
3.2.3

End a call

Press n, or place the handset back on the base or charger.
3.2.4

Receive a call

When you receive an external call, the phone rings and icon flashes on the display.
1. If the handset is off the base then press h to answer the call, or if the handset is on the
base simply lift the handset to answer the call.
NOTE
If you prefer to press h when you lift up the handset to answer a call, you will need to
switch Auto answer off.
3.3

Adjust the earpiece volume

u
During a call, press
choose from.
3.4

Mute

You can mute your handset so that you can talk to someone nearby without your caller
hearing.
1. During a call, press
m
2. Press again to resume your call.
3.5

Intercom

3.5.1

Make an internal call

If you have more than one handset registered to the base, you can make internal calls
between two handsets.
16
d
or to increase or decrease the volume. There are 5 levels to
m
. The display shows
p
to delete the last digit.
MUTE ON and your caller cannot hear you.
Using the phone