Deleting A Virb Video; Starting A Virb Video Slideshow; Device Configuration; Turning On The Chartplotter Automatically - Garmin GPSMAP 7600 Series Owner's Manual

• To play the video, select
• To skip ahead or back in the video, drag the slider.

Deleting a VIRB Video

You can delete a video or image from the VIRB action camera.
1
Open the VIRB video or image to delete.
2
Select Menu > Delete File.

Starting a VIRB Video Slideshow

You can view a slideshow of the videos and images on the VIRB
action camera.
1
From the VIRB® screen, select
2
Wait a few seconds for the thumbnail images to load.
3
Select a video or image.
4
Select Menu > Start Slideshow.
To stop the slideshow, selcet Menu > Stop Slideshow.

Device Configuration

Turning On the Chartplotter Automatically

You can set the chartplotter to turn on automatically when the
power is applied. Otherwise, you must turn on the chartplotter by
pressing .
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the chartplotter is
turned off using , and power is removed and reapplied
within less than two minutes, you may need to press
restart the chartplotter.

System Settings

Select Settings > System.
Sounds and Display: Adjusts the display and audio settings.
GPS: Provides information about the GPS satellites and
settings.
System Information: Provides information about the devices on
the network and the software version.
Station Information: Adjusts the setup of the station.
Auto Power Up: Controls what turns on automatically when
power is applied.
Simulator: Turns the simulator on or off and allows you to set
the time, date, speed, and simulated location.

Station Settings

Select Settings > System > Station Information.
Change Station: Sets the entire station to a new set of defaults
based on the location of this station. You can also select to
use this display as a stand-alone, individual display, instead
of grouping it with other displays to make a station.
GRID™ Pairing: Allows you to pair a GRID
device with this station.
Display Order: Sets the order of the displays, which is
important when using a GRID remote input device.
Reset Layouts: Restores the factory default view for the layouts
in this station.
Reset Stations: Restores the factory default layouts for all
displays in the station.

Viewing System Software Information

You can view the software version, the basemap version, all
supplemental map information (if applicable), the software
version for an optional Garmin radar (if applicable), and the unit
ID number. You may need this information to update the system
software or to purchase additional map data information.
Select Settings > System > System Information.
Device Configuration
.
.
to
remote input
™

Viewing the Event Log

The event log shows a list of system events.
Select Settings > System > System Information > Event
Log.

Preferences Settings

Select Settings > Preferences.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Navigation: Sets navigation preferences.
Keyboard Layout: Arranges the keys on the on-screen
keyboard.
Screenshot Capture: Allows the device to save images of the
screen.
User Data Sharing: Allows you to share waypoints and routes
over the Garmin Marine Network. All chartplotters that share
waypoints and routes must have this setting turned on.
Menu Bar Display: Shows or automatically hides the menu bar
when it is not needed.

Units Settings

Select Settings > Preferences > Units.
System Units: Sets the unit format for the device.
Variance: Sets the magnetic declination, the angle between
magnetic north and true north, for your present location.
North Reference: Sets the direction references used in
calculating heading information. True sets geographic north
as the north reference. Grid sets grid north as the north
reference (000º). Magnetic sets the magnetic north as the
north reference.
Position Format: Sets the position format in which a given
location reading appears. Do not change this setting unless
you are using a map or chart that specifies a different
position format.
Map Datum: Sets the coordinate system on which the map is
structured. Do not change this setting unless you are using a
map or chart that specifies a different map datum.
Time: Sets the time format, time zone, and daylight saving time.

Navigation Settings

NOTE: Some settings and options require additional charts or
hardware.
Select Settings > Preferences > Navigation.
Route Labels: Sets the type of labels shown with route turns on
the map.
Turn Transition: Adjusts how the chartplotter transitions to the
next turn or leg or the route. You can set the transition to be
based on time or distance before the turn. You can increase
the time or distance value to help improve the accuracy of the
autopilot when navigating a route or an Auto Guidance line
with many frequent turns or at higher speeds. For straighter
routes or slower speeds, lowering this value can improve
autopilot accuracy.
Auto Guidance: Sets the measurements for the Preferred
Depth, Vertical Clearance, and Shoreline Distance, when you
are using some premium maps.
Route Start: Selects a starting point for route navigation.

Auto Guidance Path Configurations

The Preferred Depth and Vertical Clearance settings influence
how the chartplotter calculates an Auto Guidance path. If an
area has an unknown water depth or an unknown obstacle
height, the Auto Guidance path is not calculated in that area. If
an area at the beginning or the end of an Auto Guidance path is
CAUTION
41