Screw specifications
M2.0 x L4.0
Go to
https://support.lenovo.com/partslookup
part:
Fan
Remove the memory module
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 58
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the memory module shielding.
Figure 62. Remove the memory module shielding
Step 3.
Release the two latches on both edges of the socket at the same time. Then, remove the memory
module.
Figure 63. Remove the memory module
Number of screws
2
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
67