Vga Cover - Lenovo IdeaCentre 5i G8 Hardware Maintenance Manual

Before you remove the chassis rubber feet, turn off the computer and wait several minutes until the computer
is cool.
For access, do the following:
1. Turn off the computer and remove all connected devices and cables.
2. Hold the sides of the computer and gently lay it down so that the computer cover is facing up.
Removal step

VGA cover

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
Before you remove the VGA cover, turn off the computer and wait several minutes until the computer is cool.
.
Chapter 6 Hardware removal and installation
49