Changing The Iso Speed Or Gain Value; Using The Control Dial - Canon 3794C002 Instruction Manual

Changing the ISO Speed or Gain Value

1 Select > [ v Camera Setup] > [ISO/Gain] > [ISO] or [Gain].
2 Depending on your previous selection, select
speed) or [Gain Increment] (gain).
3 Select the desired option.
4 Adjust the ISO speed or gain value using the direct setting mode (A 67).
• After closing the menu, press the ISO/GAIN button to highlight
the ISO speed or gain value.
• The selected ISO speed/gain value will appear at the bottom of
the screen.

Using the Control Dial

You can also adjust the ISO speed or gain value using the control dial on the camera or the one on the camera
grip. You will need to set in advance the function of one of the control dials to [ISO/Gain]. You can select the
function assigned to each control dial independently.
B
1 Select > [ System Setup] > [Camera Ctrl Dial]
(control dial on the camera) or [Camera Grip Ctrl Dial] (control
dial on the camera grip) > [ISO/Gain].
2 After closing the menu, turn the control dial assigned to [ISO/
Gain] to set the desired ISO speed or gain value.
• To select whether to change the ISO speed or the gain, perform
step 1 of the previous procedure (A 71).
NOTES NOTES
• When high ISO speeds or gain levels are set, the picture may flicker slightly.
• When high ISO speeds or gain levels are set, bright red, green or blue dots may appear on the screen. In such
case, use a faster shutter speed (A 68) or select a lower ISO speed or gain value.
• When the ISO speed or gain level is changed, some noise may appear momentarily on the screen. Do not
adjust the ISO speed/gain level while recording.
• You can use the
change the direction of the adjustment when you turn the control dial on the camera or on the camera grip,
respectively.
• When an optional RC-V100 Remote Controller is connected to the camera, you can adjust the ISO speed or
gain value with the remote controller's ISO/GAIN Í/Î buttons.
> [B System Setup] > [Camera Ctrl Dial Dir.] or [Camera Grip Ctrl Dial Dir.] setting to
v
> [ Camera Setup] > [ISO Increment] (ISO
ISO Speed/Gain
71
Control dial