Colors Bars/Audio Reference Signal; Color Bars; Audio Reference Signal - Canon 3794C002 Instruction Manual

Colors Bars/Audio Reference Signal

Colors Bars/Audio Reference Signal
In CAMERA mode, you can have the camera generate color bars and a 1 kHz audio reference signal and output
them from the following terminals. Color bars are not available when the main recording format is set to RAW.
108

Color bars

Audio reference signal

* Only when an optional viewfinder compatible with the camera is connected.
Color Bars
The camera offers SMPTE, EBU and ARIB color bars.
1 Select
2 Select
• The selected color bars appear on the screen and will be recorded when you press the REC button.
• Turning off the camera or changing the operating mode to MEDIA mode will deactivate the color bars.
NOTES NOTES
• While color bars are displayed, the magnification function (A 83) cannot be used.
• Color bars cannot be displayed when the sensor mode is set to [Super 35mm] and slow & fast
motion recording is activated with a shooting frame rate higher than 60.
• Color bars cannot be output when the gamma curve component of the [Gamma/Color Space] setting in the
custom picture file (A 128) is set to an option other than [BT.709 Wide DR] or [BT.709 Normal].
• If you set an assignable button to [Color Bars] (A 121), you can press the button to turn the color bars on/off.
Audio Reference Signal
The camera can output a 1 kHz audio reference signal with the color bars.
Select > [
• You can select one of three audio levels (–12 dB, –18 dB, –20 dB), or [Off] to turn off the signal.
• The reference signal will be output at the selected level when you display the color bars, and will be recorded
when you press the REC button.
VIDEO terminal SDI OUT terminal
Ü
–
> [ v Camera Setup] > [Color Bar Type] > Desired option.
v
> [ Camera Setup] > [Color Bars] > [On].
¡ Audio Setup] > [1 kHz Tone] > Desired option.
MON. terminal/
HDMI OUT terminal
Ü Ü
Ü Ü
(headphone)
×
Optional viewfinder*
terminal
–
Ü
–
Ü