Makita DCL184ZO Instruction Manual page 13

Removing and installing the sponge filter
CAUTION:
After cleaning sponge filter, be
sure to install it on the cleaner. If washed in water,
dry it up before installing. An insufficiently dried
sponge filter may shorten the service life of the motor.
To remove the sponge filter, remove the dust bag or
paper filter and then pinch and take it out.
► 1. Sponge filter
Press in the whole edge of the sponge filter against the
recessed wall inside the dust bag/paper filter mounting area.
► 1. Recessed wall
Storage
WARNING:
Never leave the battery cartridge and
charger in a car. The temperature inside a car sitting in the sun
may exceed 50 °C (122 °F). It may cause the battery cartridge
deteriorated and result in liquid ejection, smoke emission or a fire.
1
1
WARNING:
ing it in the storage bag. Blocking the air vent may
result in smoking emission or a fire.
WARNING:
with on-vehicle inverter. It may cause abnormal
heat and result in a fire.
WARNING:
in a car. If the battery cartridge is exposed to the tem-
perature range out of 10°C (50 °F) - 40°C (104 °F), it
may generate heat and/or fire or explode.
CAUTION:
Always store the hose as illus-
trated to avoid tripping, when the cleaner is not
used. Unfolded hose may catch your foot and cause
personal injury.
1
► 1. Hook 2. Hose
13 ENGLISH
Never use the charger while stor-
Never charge the battery cartridge
Never charge the battery cartridge
2