Introduction; Intended Audience - Omron CK3W-ECS300 Startup Manual

1 About This Guide
1-1

Introduction

This document describes the connecting procedure and confirmation for an OMRON Programmable
Multi-Axis Controller CK£M-CPU1£1 (hereinafter referred to as "Controller") and a serial encoder of
BiSS-C, EnDAT2.1/2.2, and 1S Motor with serial communication protocols.
Understanding the settings and key points of the setting procedures described in Section 3 Serial En-
coder Connection Procedures on page 3-1, helps you configure the Controller to communicate with
a Serial Encoder that supports each protocol and receive absolute position information.
1-1-1

Intended Audience

This guide is intended for the following personnel, who must also have knowledge of electrical sys-
tems (electrical or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
Also, this guide is intended for personnel who understand the contents described in the DT manual.
1-2
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)