Table of Contents
Advertisement
Table 25. Redundant OS Control details
Option
Redundant OS Location
Redundant OS State
Redundant OS Boot
Miscellaneous Settings
To view the Miscellaneous Settings screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > Miscellaneous Settings.
Table 26. Miscellaneous Settings details
Option
System Time
System Date
Asset Tag
Keyboard NumLock
F1/F2 Prompt on Error
Load Legacy Video Option ROM
Dell Wyse P25/P45 BIOS Access
Power Cycle Request
iDRAC Settings utility
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable
various iDRAC parameters by using the iDRAC settings utility.
Description
Enables you to select a backup disk from the following devices:
● None
● IDSDM
● SATA Ports in AHCI mode
● BOSS PCIe Cards (Internal M.2 Drives)
●
● Internal USB
NOTE:
RAID configurations and NVMe cards are not included, as BIOS does not
have the ability to distinguish between individual drives in those configurations.
NOTE:
This option is disabled if Redundant OS Location is set to None.
When set to Visible, the backup disk is visible to the boot list and OS. When set to
Hidden, the backup disk is disabled and is not visible to the boot list and OS. This option
is set to Visible by default.
NOTE:
BIOS disables the device in hardware, so it is not accessed by the OS.
NOTE:
This option is disabled if Redundant OS Location is set to None or if
Redundant OS State is set to Hidden.
When set to Enabled, BIOS boots to the device specified in Redundant OS Location.
When set to Disabled, BIOS preserves the current boot list settings. This option is set to
Enabled by default.
Description
Enables you to set the time on the system.
Enables you to set the date on the system.
Specifies the asset tag and enables you to modify it for security and tracking
purposes.
Enables you to set whether the system boots with the NumLock enabled or
disabled. This option is set to On by default.
NOTE:
This option does not apply to 84-key keyboards.
Enables or disables the F1/F2 prompt on error. This option is set to Enabled by
default. The F1/F2 prompt also includes keyboard errors.
Enables or disables the Load Legacy Video Option ROM option. This option is
set to Disabled by default.
Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to
Enabled by default.
Enables or disables the Power Cycle Request. This option is set to None by
default.
Pre-operating system management applications
21
Advertisement
Table of Contents
