Dell E67S Reference Manual page 13

Table 14. HTTP Device n Settings details (continued)
Option
Secondary DNS
URI
Table 15. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Table 16. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Integrated Devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Integrated Devices.
Table 17. Integrated Devices details
Option
User Accessible USB Ports
Internal USB Port
iDRAC Direct USB Port
Integrated RAID Controller
Embedded NIC1 and NIC2
Description
Specifies the secondary DNS server IP address for the HTTP Device.
Obtain URI from the DHCP server if not specified
Description
Specifies the name of the iSCSI initiator in IQN format.
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to Disabled by default.
Enables you to control the configuration of the iSCSI device.
Description
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the order for which the iSCSI connections will be
attempted.
Description
Configures the user accessible USB ports. Selecting Only Back Ports On
disables the front USB ports; selecting All Ports Off disables all front and
back USB ports; selecting All Ports Off (Dynamic) disables all front and back
USB ports during POST. This option is set to All Ports On by default.
When user accessible USB ports is set to All Ports Off (Dynamic) the
Enable Front Ports Only option is enabled.
● Enable Front Ports Only: Enables or disables the front USB ports during
the OS runtime.
The USB keyboard and mouse still function in certain USB ports during the
boot process, depending on the selection. After the boot process is complete,
the USB ports will be enabled or disabled as per the setting.
Enables or disables the Internal USB Port. This option is set to On or Off.
This option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host
visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not
detect any USB devices installed in this managed port. This option is set to On
by default.
Enables or disables the integrated RAID controller. This option is set to
Enabled by default.
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled
(OS), the NIC may still be available for shared network access by the
Pre-operating system management applications 13