Bosch VitaPower Cook MMBH311WHK Information For Use page 26

en Troubleshooting
Fault
Ingredients are burn-
ing.
Lid is leaking.
Display shows "- - - -".
Display shows "E01"
or "E02".
Display shows "E03".
1
Depending on the model
26
Cause and troubleshooting
The dry ingredients that were selected are too dry for
heating.
Before heating, add a sufficient volume of water to
▶
dilute the ingredients.
Ingredients with a high milk, starch or sugar content
were selected for heating.
To remove all residues, run the cleaning pro-
▶
gramme several times.
→ "Cleaning and servicing", Page 20
Selected programme is unsuitable.
Select a suitable programme or suitable function as
▶
described in these instructions.
Quantity is too high or too low.
Observe the quantities in the recipes.
1.
Adjust the quantity.
2.
Sensor in the lid of the heated blender jug is soiled.
Clean the sensor on the inside of the lid thoroughly.
1.
Dry the lid before fitting it back on.
2.
Sensor in the lid of the heated blender jug has no
1
contact.
Fit the lid correctly and rotate as far as possible.
▶
Jug or lid is not fitted properly.
Fit the jug and lid properly.
▶
Temperature sensor faulty.
If the message continues to appear after you have
▶
unplugged the appliance and plugged it back in
again, please contact Customer Service.
→ "Customer Service", Page 28
Quantity is too low.
Observe the quantities in the recipes.
1.
Adjust the quantity.
2.
If the message continues to appear after you have
▶
unplugged the appliance and plugged it back in
again, please contact Customer Service.
→ "Customer Service", Page 28
The bottom of the blender jug is not clean.
Clean the bottom of the blender jug thoroughly.
▶
1